When the conditions are just right, a plumbing system can last for many years without having significant problems of any kind. Of course, things aren’t always just right, and issues with the quality of your water supply can wreak havoc. Specifically, hard water presents plenty of problems, and this article will discuss those so you can understand how to fight back properly.

If damage from hard water has led to the need for Greensboro plumbing repair, call the team at Berico today. Berico offers a long list of plumbing services and will be able to solve any issues that you are facing.

 

What is Hard Water?

The term “hard water” is used to describe water that has a high level of dissolved minerals. These minerals can be many things, but it is usually calcium and magnesium that are the primary offenders. While there is nothing dangerous about hard water in terms of your health, the story is very different when it comes to your plumbing system. Over time, the minerals in the water will accumulate on your plumbing components and can cause major problems.

 

The Impact of Scale Buildup

Over the course of a day or two, you wouldn’t notice anything different when monitoring the condition of your plumbing system when hard water is present. Given enough time, however, the mineral deposits are going to start to add up. Slowly, the interior of a pipe will narrow as a result of minerals collecting on the surface. This will start to reduce water flow, and you’ll notice a decline in the performance of your plumbing. It’s even possible for the buildup in an older pipe to get so bad that the water can’t flow at all anymore.

 

Problems with Soap

Have you ever noticed that the water in your house doesn’t seem to create a nice foamy lather when you mix it with soap? Hard water is likely to blame here, as well. With hard water, soap will usually turn into a sticky residue known as soap scum. This makes it difficult to clean things properly, and a film from the scum will also accumulate over time in pipes and drains.

 

How to Deal with the Problem

Having a water softener installed is the best way to deal with hard water. This is a device that is designed to pull excess minerals out of your water supply before they can do damage to your plumbing system. If you suspect that hard water is an issue for your home and your plumbing, call in a professional to have the water tested as a first step.

 

Put Expert Help on Your Side

Hard water can cause problems, but it’s nothing that the best plumber Greensboro has to offer can’t handle. Take a moment to make your first appointment with the Berico team today, and you’ll have a Greensboro plumber that will always work with your best interests in mind.

Having the right size AC unit for your home is a key component of staying comfortable in Greensboro throughout the hot summer months. It might seem like the only problem here would be having an AC unit that is too small, but having a system that is too large for your home can be problematic, as well.

If you are getting ready for an air conditioning installation project, reach out to Berico today to get help from experienced professionals. You’ll be in good hands with the Berico team, and you can be sure that the finished product will be a system that serves your family well for years.

 

The Importance of AC Sizing

Bigger is not always better in the world of air conditioning. If you just purchase a large AC unit and assume it will be more than enough to cool your home, you’ll have problems with it cycling on and off too often – leading to high energy bills and increased wear and tear.

Of course, if your AC unit is undersized, it won’t be able to keep up with the demands of keeping a house in Greensboro cool in the middle of the summer. Accurately assessing your home’s needs and getting as close as possible to the perfect size is important if you are going to get efficient performance year after year.

 

Understanding How to Read Air Conditioner Sizes

When you look at various air conditioners on the market, you’ll see that they are labeled with a “ton” capacity. That’s how much heat the system can take out of a house in an hour, with a ton equating to 12,000 British Thermal Units. So, for example, a small air conditioner might be rated for just 2 tons, while a bigger unit could be rated for 4 or more.

 

Estimates and a Warning

You can roughly estimate the size that your air conditioner should be based on the size of your home. If you have a smaller home around 1,000 square feet, a unit in the 1.5 – 2-ton range will often work well. On the other hand, a house at 2,000 square feet or more is usually going to need at least a 3.5 – 4-ton system.

The warning that applies here is that there are other factors to weigh that need to be evaluated by a professional. To get the right size system for your home, and to be sure the system is going to serve you well for years to come, work with an experienced contractor right from the start.

 

Berico Does More Than AC Installations

Installing a new, properly-sized air conditioner is one of the many tasks Berico can complete on your Greensboro property. A/C repair is also available to get your system back up and running in no time. If the need for Greensboro AC repair has popped up during a particularly hot stretch of weather, simply call Berico right away and look forward to the cold air flowing again shortly.

There are few things as frustrating to the average homeowner as a toilet that just won’t stop running. No matter what you do, it seems like the water just keeps flowing. The sound is annoying, as is the concern that you might be wasting water at all hours of the day and night.

This post will help you understand what is happening here and what you can do to fix it. For professional toilet repair from a trusted team of experts, call Berico right away. A running toilet might be annoying, but it doesn’t have to be a problem for long. Make your appointment today and put this problem in the past!

 

Is the Running Toilet Wasting Water?

The easy answer here is yes – and it might be wasting far more than you would imagine. In fact, depending on how bad the problem is, it’s possible that the toilet could be wasting hundreds of gallons in a single day. That’s bad for both the environment and your bank account. Even a small amount will add up rather quickly when it is allowed to persist for 24 hours per day.

 

A Few Possible Reasons

There are a variety of reasons that you might be dealing with a running toilet. Whatever the cause might be, call Berico for help as soon as possible so you can put an end to this problem shortly.

• Flapper issues. The flapper is the part inside the toilet tank that stops the water from flowing. If it is worn-out, or poorly aligned, you’ll end up with a running toilet. A new flapper is cheap and easy to install, making this a simple fix.
• Chain problems. Another potentially easy solution to this issue is fixing a problem with the chain that controls the movement of the flapper. The chain might be too long or too short. A plumber will easily be able to correct this issue so the flapper can get back in the right spot to do its job.
• Faulty fill valve. This valve is responsible for controlling the water that goes into the tank. If it’s not working, the water can just keep flowing and flowing with no end in sight. When the valve is worn out, having it replaced is the solution.
• Float position too high. The float is another component in the tank. Its job is to manage the water level in the tank and make sure it doesn’t get too high. The height of the float can be adjusted with the screw that holds it in place – lowering it can stop water from constantly flowing into the overflow tube.

 

Put Your Toilet Worries to Rest

Do you have a broken toilet, or is there just a simple fix needed to get yours back into proper working order? The Berico team will be able to figure it out for you. Simply call the Berico office today to talk about your situation and find an appointment time that fits in your schedule. Don’t wait another day!

You probably haven’t thought about your electrical panel in a while. In fact, unless the power goes out or you need to work on something that requires turning off a breaker, you never think about your panel. It just sits off somewhere, quietly getting the job done.

Everything wears out over time, however, and that includes electrical panels. If it’s time for a Greensboro electrical panel upgrade, the talented team at Berico is ready to work on the project. Take a moment now to call and learn more about breaker box replacement and other services offered by this trusted brand.

 

What Does an Electrical Panel Do?

The primary job of the panel is to distribute power throughout your home. Electricity flows into your home from the grid, and it comes to the panel where it is then divided up among a number of different circuits. Each of these circuits has a breaker that will trip when the circuit is overloaded. This is an important safety feature that prevents fires and damage.

Older homes may still have electrical panels that aren’t up to the task of handling how much power modern homes consume. With so many things plugged in these days, your old panel might not be up to the task, and it might need to be replaced.

 

Signs Your Electrical Panel Might Need an Upgrade

You don’t have to be an electrician to notice that your panel might need to be replaced in the near future. Watch for some of the signs below and call Berico for help right away.

• Frequent tripping breakers. If the breakers in your panel are regularly tripping with no obvious explanation, that’s a sure sign of trouble. The panel may simply be overworked for what it can handle, and an upgrade will be in order.
• Flickering lights. Have you noticed that your lights dim when you turn on one of your appliances, such as the microwave? That’s another sign that the panel isn’t capable of handling the demands that you are placing on it.
• Burning smell. You should never ignore a burning smell in your home. In this case, if the panel smells like it is burning, that’s because it is overheating, and a fire is a possibility. Don’t wait around when this issue exists – call Berico right away for assistance.
• Buzzing sounds. Just like a burning smell, buzzing sounds are also an indication of trouble. When electricity is working well, it is silent. This is another serious warning sign that demands immediate action.

 

Put Your Mind at Ease

An old electrical panel can lead to electrical troubles and can even be a fire hazard. Whether you opt for breaker panel repair in Greensboro or new electrical panel installation, Berico is the right call for this project. Get in touch right away to reserve a spot on the schedule and make sure your home is powered safely and efficiently for years to come.

Electricity is incredibly reliable. Just flip a switch and an entire room will light up time after time. But what happens when it doesn’t? Electrical problems can pop up on occasion, and some of the most common issues will be highlighted below.

 

To work with a Greensboro electrician you can trust to handle any problems you encounter, contact Berico to make an appointment today. You’ll be in good hands with the experienced pros on the Berico staff.

 

Four Common Electrical Problems

It’s not going to be possible to list every potential electrical problem you could encounter in your home. Below, however, you will find four of the leading issues that people in the Greensboro area may face with their systems.

 

• Frequent circuit breaker trips. This is a frustrating one, to be sure. If your breakers keep tripping, it could be due to an overloaded circuit, a short circuit, or a ground fault. One potential issue is having too many high-energy appliances plugged into the same circuit.

 

• Flickering lights. If your lights keep flickering on and off, you might be dealing with a loose electrical connection, outdated wiring, or an overloaded circuit.

 

• Dead outlets. It can be surprising to plug something into an outlet only to find that no power is being supplied. At first, you might think the problem is with the item that you plugged in rather than with the outlet itself, but there could be a more serious problem.

 

• Burning smell. This one is immediately concerning, even if you don’t know anything about electrical systems. Consider a burning odor to be a serious red flag as the circuit is likely overheating and a fire is possible.

 

How to Address a Troublesome Electrical System

When you encounter an electrical problem, it’s important to address it right away. Fixing electrical issues quickly will not only allow you to get back to using the system as intended, but it will also cut down on the risk of a dangerous fire.

 

First, bring in a professional electrician to deal with the specific problem you are facing. For instance, if your breakers are tripping regularly or if your lights are flickering, have a contractor address the matter right away. These types of fixes are often rather affordable and can be completed quickly in most cases.

 

From there, make it a point to get on a regular schedule of electrical inspections with your contractor. Those inspections will allow you to catch potential issues before they become bigger, more dangerous problems. Just as you may have your HVAC system serviced annually, you can also have your electrical work inspected to ensure everything is in good condition.

 

Are you dealing with a frustrating electrical problem in your Greensboro home or business? Stop wasting time searching for an “electrician near me” and just call Berico instead. You’ll immediately be working with a qualified electrical contractor that offers competitive rates and prompt service. Make the call and leave your electrical struggles in the past!